Sonic Drill Rigs

SRS T | SmallRotoSonic Tractor mast

Share this page

Main information

Sonic drilling is the fastest drilling method for all overburden formations! Than why should you waste time for mobilization of drilling equipment between boreholes?

The SmallRotoSonic Tractor mast (SRS-T), specification sheet heretransforms a modern agricultural tractor into a powerful drilling rig. Modern tractors are fast and most of them can provide enough engine power to drive a SmallRotoSonic drill head. Power to the drill is taken from the tractors Power Take Off (PTO).

A small trailer is sufficient to transport the mast to the job site. Arrived in the region where you want to drill, you just connect it to a local (rented) tractor and start drilling. 

What makes sonic drilling with the SonicMast SRS-T different?

  • Hooks straight forward in the 3-hitch system of a tractor > 100 hp (90 minimum). PTO shaft 2000 rpm @ 540 rpm
  • Practically all maintenance can be done by local tractor specialists
  • Tractors on arable land are often more acceptable than crawlers or trucks
  • Nothing can beat the versatility, reliability, manoeuvrability and speed of a tractor
  • Anyone can drive it
  • Mast can, after some adaptation, be combined with a hydraulic power pack (HPP) to become a stand-alone rig on a skid, barge or truck (separate brochure available)

What can you do with the SmallRotoSonic-T?

  • Environmental drilling and sampling
  • Remediation drilling / well installations
  • Geothermal drilling
  • Seismic drilling  
  • Dewatering drilling
  • Foundation drilling
  • Archaeological sampling
  • Sampling of railway beds
  • Off-shore sampling of saturated sediments
  • Bomb detection
  • Minerals sampling
  • New developments are under way!!
  • Your unique application

Sonic tooling & drilling

AquaLock sampler   CoreBarrel sampler    Double breakout clamp   

Injection Lance  Seismic drilling  Sonic Smart Well Consumables

Casing, bits and tooling  Sonic Swivels   Casing connection lubrication

Railway gravel sampler  Sonic sampling for mining  Geotechnical drilling

Environmental drilling  Overview Sonic tooling 

Specifications

SmallRotoSonic drill head    (full specification sheet)

  • Sonic Vibration Oscillator Output Force 100kN @ 0-150 Hz/22480
  • 2 Eccentrics, mechanically synchronized  
  • Rotation Torque: Clockwise 1245ft-lbf @ 2175 PSI, 0-120 RPM
  • Rotation Torque: Counter Clockwise 1475 ft-lbf @ 2540 PSI, 0-120 RPM

Rig

  • Designed for PTO drive by agricultural tractor lifted by 3-point linkage
  • Dimensions folded (L x W x H) approx. 1400 x 1600 x 2340 mm / 4’ 7” x 5’ 3” x 7’ 8”
  • Height (when drilling) max. 3720 mm / 12’ 2”
  • Weight approx. 1300 kg / 2865 lbs
  • PTO driven
  • Load sense hydraulic system
  • Single foot clamp 50 - 280 mm / 2” - 11”
  • Single break out arm
  • Water tank: 140 liter / 37 gallon
  • High pressure water pump 19 l/min @ 210 bar / 5 gpm @ 3045 PSI
  • Work lights

Mast

  • Stroke: 2445 mm / 8’
  • Pull up & down speed: 30 m/min / 100 ft/min

Tractor requirements

  • Power:  > 75 kW / > 100 hp
  • PTO: 1000 rpm
  • 3-point linkage category 2/3

Options

  • Casing rack
  • Swivel for water assisted drilling

Features

  • Prepared for hydraulic high pressure water pump for AquaLock sampler. Prod. nr. 30.11.01 (19 l/min @ 210 bar)
  • Arctic conditions: Aerohydraulic 520 mineral oil (-66/+100°C)
  • Pressure gauges (7) stainless steel type
  • Hydraulic Break Out Clamp to loosen rods 63-100 mm
  • Water tank stainless steel 105 ltr. Prod. nr. 30.11.10
  • Different rod racks

Pictures


E-mail us at: sales@sonicsampdrill.com

SRS T | SmallRotoSonic Tractor mast

Please, send me a pdf


Are you interested in more information? We can provide you with an extensive PDF file. Please fill in the form.

* Marked fields are mandatory