Sonic Tooling

Drill’n CPT

Share this page

Main information

Drill’n CPT

Combine Sonic drilling with Cone Penetration Testing

Drill'n CPT is a 10- or 20 ton fully automatic CPT tool that is placed in the break out clamps of a drill rig. Our Drill'n CPT tool allows you to convert every (sonic) drill rig into a CPT unit. It can deliver a continuous CPT measurement or measure in between sampling. It is also the perfect combination to advance casing through refusal layers and apply CPT testing to greater depths.

General

Automatic:

  • Modus 1 CPT measurement
  • Modus 2 Fast feed trip in
  • Modus 3 Fast feed trip out

Available products for Cone Penetration Testing and SonicCPT

  • SonicCPT electrical cone, measuring:
      Tip resistance (qc)
      Sleeve friction (fs)
      Deviation in two directions
  • CPT Logging equipment, data logger, depth encoder
  • Cables
  • Electrical cones available for static CPT:
      CPT cone
      CPTu Pore pressure cone (u1-u3)
      Electric Conductivity cone
      Video cone
      Magnetic field detection cone
  • Ground anchors for light drill rigs
  • Software
  • Training

Specification

SPECIFICATIONS* Drill’n CPT 10 Ton Drill’n CPT 20 Ton
CPT force max. 100 kN 22,480 lbf 200 kN 44,960 lbf
Oil pressure 75 bar 1,087 psi 150 bar 2,175 psi
Max. system pressure 210 bar 3,045 psi 210 bar 3,045 psi
Required oil flow 4.4 gpm 20 l/min 4.4 gpm
Max. oil flow 60 l/min 13.2 gpm 60 l/min 13.2 gpm
CPT speed 20 ... 25 mm/s 00.65 ... 0.1082 ft/s 20 ... 25 mm/s 00.65 ... 0.1082 ft/s
CPT stroke 800 mm 31.5" 800 mm 31.5"
Pull back force max. 120 kN 29,977 lbf 240 kN 53,954 lbf
Max. return speed in automatic mode 60 mm/s 0.196 ft/s 60 mm/s 0.196 ft/s
Depth registration encoder up to 20 puls/mm up to 500 puls/1" up to 20 puls/mm up to 500 puls/1"
CPT rod diameter 36 ... 44 mm 1.417 - 1.732" 36 ... 44 mm 1.417 - 1.732"
         
Hydraulic rod clamping cilinder Standard Standard Standard Standard
         
SonicCPT hydraulic clamping Option Option Option Option
         
Height 1.750 mm 68.9" 1.750 mm 68.9"
Width 700 mm; 27.6" 700 mm 27.6"
Depth 600 mm 23.6" 600 mm 23.6"
Clamping diameter 190 mm 7.5" 190 mm 7.5"
         
Electrical power 24V-5A / 12V-10A 24V-5A / 12V-10A 24V-5A / 12V-10A 24V-5A / 12V-10A

Pictures

Eijkelkamp SonicSampDrill
Headquarters
Uitmaat 8
6987 ER Giesbeek
The Netherlands

Drop us an email at: sales@sonicsampdrill.com

or Call us today +31 313 88 02 01

or find a representative sales@sonicsampdrill.com

Subscribe to our newsletter