Sonic Drill Rigs

CompactRotoSonic CRS-XL Max

Share this page

Main information

The CompactRotoSonic XL Max crawler is built to work in the most diverse working conditions. You can use it in small spaces because of its high manoeuvrability. A separate swivel allow for liquid, foam or air assisted drilling. The XL Max allows you to use SPT as well.

The CompactRotoSonic XL Max is outfitted with

  • Sonic head: Sonic vibration oscillator output force 150 kN (synchronized), frequency 0 - 150 Hz (see here for detailed specification sheet)
  • Rig: John Deere 4 cylinder water cooled engine 129 kW (173 HP)
  • Hydraulic system: load sensing
  • Mast: Sonic Drilling mast with 4.500mm stroke, 600 mm mast dump
  • Winch: Pull at 1st layer 1000 daN

The CompactRotoSonic XL Max is available with these options

  • SPT auto drop hammer with blow count meter on control panel.
  • Casing lifter mounted on break out clamp 20 ton, stroke 300mm.
  • Automatic manipulator with block valves and accumulators for secured grip and operation.
  • Drill pipe storage suitable for 36-40 rods at 3m length. (total meterage of drill rod storage depending on diameter). 
  • Pneumatic separators among different rod layers.

Working with the CompactRotoSonic XL Max Sonic Drill Rig

Sonic tooling & drilling 

AquaLock sampler   CoreBarrel sampler    Double breakout clamp   

Injection Lance  Seismic drilling  Sonic Smart Well Consumables

Casing, bits and tooling  Sonic Swivels   Casing connection lubrication

Railway gravel sampler  Sonic sampling for mining  Geotechnical drilling

Environmental drilling  Overview Sonic tooling 

Specifications

CompactRotoSonic HT drill head    (full specification sheet)

  • Max frequency 0-150 Hz
  • Sonic vibration oscillator output force 150 kN / 33.8 k lbf
  • 2 eccentrics, mechanically synchronized
  • Rotation torque: clockwise 0-120 rpm 2.650 Nm @ 185 bar / 1,955 ft-lbf @ 2,680 psi
  • Rotation torque: counter clockwise 3.000 Nm @ 210 bar / 2,210 ft-lbf @ 3,045 psi

Rig

  • John Deere 4 cylinder water cooled engine 129 kW / 173 HP
  • Dimensions folded (LxWxH) approx. 8.850 x 2.310 x 2.995mm / 29’ x 7’7” x 9’11”
  • Height (when drilling) max. 7.500mm / 24’7”
  • Mass approx. 12.000 kg / 26,455 lbs
  • Fuel tank (diesel) 190 liter / 50 gallon
  • Load sening hydraulic system
  • Control panel on turning arm
  • High pressure water pump 19 l/min. @ 210 bar / 5 gpm @ 3,045 psi
  • Large flow water pump 160 l/min. @ 45 bar / 42 gpm @ 652 psi
  • Aluminum water tank 500 liter / 132 gallon
  • Rubber tracks
  • Radio remote for driving
  • Work lights 4

Rod / casing handler

  • Mechanical separators among different rod layers
  • Casing or drill rod storage depends on diameter and length

Mast

  • Stroke 4.500 mm / 14’9”
  • Mast dump 600 mm / 2’
  • Pull up 80 kN / 18,000 lbf
  • Pull down 65 kN / 14,610 lbf
  • Pull up and down speed 40 m/min / 130 ft/min
  • Double hydraulic break out clamp 60-280 mm /  2 3/8” - 11”
  • Adjustable clamping force of 110 kN / 24730 lbf
  • Break out torque 20 kNm / 14750 ft-lbf
  • Hydraulic break out cylinder
  • Main winch 1000 daN, 100m/min, 100 m / 2,250 ft-lbf, 328' / min, 328'

 

Features

Available options

  • SPT auto drop hammer with blow counter on control panel
  • Casing lifter mounted on break out clamp 200 kN, stroke 300 mm / 45,000 lbs, stroke 12”
  • Pneumatic separators among different rod layers
  • Mud pump triplex piston 200 liter @ 70 bar / 53 gallon @ 1015 psi
  • SPX40 hose pump 114 l/min @9.6 bar / 30 gpm @140 psi
  • Steel tracks
  • Triple floatable clamp
  • ManuAll 200 (magnetic rod loading arm)
  • Safety cage
  • Slewable, extendable jibboom
 

Pictures


E-mail us at: sales@sonicsampdrill.com

CompactRotoSonic CRS-XL Max

Call me back


Are you interested in more information? We can provide you with an extensive PDF form. Please let us know with the form below.

* Marked fields are mandatory